Maintenance Plan Of Photo Machine Before Long Time Pause Printing

- Oct 28, 2020-

The use and high-quality maintenance of piezoelectric photo machine can greatly extend the service life of equipment and nozzle, especially the maintenance of nozzle. High quality maintenance can greatly improve the working efficiency of the photo machine and make more profits for your photo printing.    


After the piezoelectric camera is placed for a period of time, the ink on the head of the photo machine is easy to solidify. In this case, it is easy to block the nozzle when the photo machine is started for the first time. At the same time, it may also cause ink break during the operation of the photo machine, and even cause other faults such as oblique spray, eccentric needle and flying ink.


So, In the case of not using the photo machine for a long time, it is necessary to carry out relevant maintenance for the camera and the nozzle in advance, especially those who use oily ink, should clean the nozzle in time to avoid long-term non use. The ink solidifies due to long-time contact with air and other reasons. The ink will volatilize and dry after contacting with air, which may be on the nozzle surface and medium There is residual ink on the surface. Due to the long-term contact between the ink and the air after drying, the solid matter will be formed, especially the oily ink. If the ink is not cleaned or cleaned in time, it is easy to form nozzle blockage for a long time.


If you do not do a good job in the maintenance work before you stop using the camera, you may have a serious problem of nozzle plug when you use the machine again after the holiday. Clean and moisturize the spray head, or if necessary, remove the nozzle for cleaning, wrapping, packaging and placing; rinse the ink in the nozzle with the relevant nozzle cleaning solution, and after cleaning, do a good job in the relevant spray head moisturizing, for example, use moisturizing liquid to moisturize the spray head, and then use the preservative film to seal the nozzle, place it, and then install it for use.


In addition, it is better to keep the power off during the suspension of the camera. Do not let the camera live and connect to the computer when it is idle. The main body of the camera can be covered with dust-proof cloth to avoid dust and moisture-proof problems during holidays. Clean the surface of the camera and dust-proof placement, disconnect the relevant power supply of the camera, close the relevant shell of the camera and place it well, and pay attention to the rodent protection of the storage environment.


  报错 笔记